—

Lasertec (6920.T) — chart, structure and Closelooknet read

The Closelooknet read

Lasertec makes inspection and metrology systems used in chip manufacturing, best known for tools that inspect the photomasks and mask blanks used in extreme ultraviolet lithography. Its systems check these masks for defects before they are used to pattern wafers, work that becomes more demanding as chipmakers move to smaller process nodes.

Detail below: the desk's view, the earnings record, peers and the company snapshot; daily prices on the price-history tab. Research diary readings, not advice.

Pick a ticker to load its detail page.

Signals for this name

Every Closelooknet reading that exists for 6920.T, from the same nightly bakes the boards use. Research diary readings, not advice.

Versus its index Rubin Build-Out 100 — the name, its sleeve and the index over day, week and month

Versus its index

The name against its Closelooknet index and its own sleeve — equal-weight, nightly closes.

Rubin Build-Out 100 · as of 2026-11-06

DayWeekMonth3 months
6920.T−4.6%−22.5%−31.2%−21.7%
Testing & Metrology+3.4%−13.7%−34.4%—
Rubin Build-Out 100+0.8%−13.2%−28.8%—

Against the index: 9.3 pts behind on the week, 2.4 pts behind on the month; against its Testing & Metrology sleeve 3.2 pts ahead on the month.

Returns from the index workers’ nightly closes; equal-weight sleeves. A relative reading from the research diary, not advice.

Mentioned on Closelooknet 3 pieces · newest: Midday 10, “AI comeback — Accenture +18%, Synopsys +8%, optics +9% while all three US indices slip” (2026-10-01)

Mentioned on Closelooknet

Where 6920.T appears in the diary — 3 pieces, newest first. Every link is our own writing.

Dailies

Weather around the name 3 macro readings: Money Temperature, Factor regime, Sovereign pressure

The weather around this name

Macro readings that apply by membership — the regime, the factor tape, the sector cell, the funding backdrop.

  • Money Temperature Composite 47/100 · S&P 500 fund at 48, above its 200-day averageEight instruments scored on position, momentum, volume, volatility and fragility — the regime every name trades inside. Temperature lab → 2026-11-06
  • Factor regime Defensive rotation — low-vol leading, regime-change watchMomentum against low volatility (SPMO / SPLV): below its 50-day trend, 60th percentile of the window, -22.8% over 20 sessions. Factor regime → 2026-11-06
  • Sovereign pressure Index -1.91 · down 2.45 over 21 sessionsG7 long-end yields, 10s30s and the slope — the funding weather for every balance sheet on this site. Sovereign pressure → 2026-11-06
Who it is priced against Rubin Build-Out 100 · Testing & Metrology · 8 names with week and year-to-date

ATE testers, inspection, and metrology vendors. The constraint that keeps yield curves honest at every node shrink.

Compared against 6920.T on the nightly bakes; the Peers tab ranks the cohort on the Closelooknet scores where it exists.

Company snapshot — Lasertec

6920.T in five paragraphs: what it makes and sells, where it sits in the Closelooknet stack, who it is priced against, why we track it, what we watch. Research diary, not advice.

What it does
Lasertec makes inspection and metrology systems used in chip manufacturing, best known for tools that inspect the photomasks and mask blanks used in extreme ultraviolet lithography. Its systems check these masks for defects before they are used to pattern wafers, work that becomes more demanding as chipmakers move to smaller process nodes. It is based in Yokohama, Japan.
Where it sits in the stack
In our Rubin Build-Out 100 index, Lasertec sits in Layer 3, Assembly & Test, within the Testing & Metrology sleeve — the group of ATE testers, inspection and metrology vendors that keeps yield curves honest as nodes shrink. Lasertec is a constraint here because mask inspection has to keep pace before wafers can even be exposed correctly.
Who it is priced against
Its peer group is the Rubin index's Testing & Metrology sleeve, grouped for the same reason: ATE testers, inspection, and metrology vendors that keep yield curves honest at every node shrink. That group includes Teradyne, Onto Innovation, KLA, Camtek, PDF Solutions, Cohu, Nova and Aehr Test Systems.
Why Closelooknet tracks it
Lasertec is a constituent of the Rubin Build-Out 100. It carries a Closelooknet score, but only one module has been scored so far, so the score is still being built. The diary's Morning 10 has quoted it twice, once on a Tokyo equipment rally and once in a note on clustered support tests across the metrology names.
What the diary watches
Whether mask inspection demand keeps tracking node shrinks and advanced packaging growth, and whether Lasertec moves with the wider Testing & Metrology sleeve when equipment orders are questioned.

Lasertec (6920.T) trades on the TSE exchange in Japan, and sits in Layer 3 of the build-out stack. Constituent of Rubin Build-Out 100.

Written from the company’s public profile and Closelooknet’s own readings, 2026-09-17. Descriptive, refreshed with the registry; corrections welcome via the imprint. closelook.net is an investment research diary — market structure, index membership and scores are our own readings, not investment advice. Related: index compare · sector dispersion · scanner.

FAQ · from the current data · as of 2026-11-07

Quick answers

What is Lasertec (6920.T)?

Lasertec trades as 6920.T on the TSE exchange (Japan) in the Closelooknet research universe, as of the registry build of 2026-11-07.

Is 6920.T in a Closelooknet index?

Yes — Lasertec is a constituent of Rubin Build-Out 100, as of 2026-11-07.

Where does 6920.T trade against its moving averages?

Lasertec trades 17.2% below its 50-day and 18.5% below its 200-day moving average (20.3% below its 20-day). As of 2026-11-06 — a technical state from the nightly Closelooknet bake, not advice. The Technical tab carries the full row.

How is 6920.T doing against its Closelooknet index?

Over the past month Lasertec is −31.2% against −28.8% for the Rubin Build-Out 100 — 2.4 points behind its index, as of 2026-11-06. Its Testing & Metrology sleeve is −34.4% over the same month. The “Versus its index” table on this page carries the day, the week and the month for the name, its sleeve and the index.

How does Lasertec compare with its peers?

Against its peer group (Rubin Build-Out 100 · Testing & Metrology), Lasertec (6920.T) sits 45.3% below its 52-week high, 17.2% below its 50-day average; Onto Innovation Inc (ONTO) is 59.6% below, KLA Corporation (KLAC) is 57.7% below, FormFactor Inc (FORM) is 55.2% below, as of 2026-11-06. Put any of them next to 6920.T in the chart grid (2×1 or 2×2) and the page lays the companies side by side: performance, trend, valuation, margins and our money-flow reading.

Where has Closelooknet written about Lasertec?

Lasertec appears in 3 Closelooknet pieces as of 2026-11-07, most recently Midday 10: AI comeback — Accenture +18%, Synopsys +8%, optics +9% while all three US indices slip (2026-10-01); Morning 10: Kospi jumps 4% on OpenAI’s new model: SK hynix +7%, Kioxia +9%, SoftBank +10% — while gold and bitcoin slide on the rate-hike odds (2026-09-07); Morning 10: The counter-test gets paid — CoreWeave +16% overnight as Seoul melts up into CPI (2026-08-12). What Closelooknet said most recently: AI hardware suppliers jump: Coherent $316.10 (+9.83%), Lumentum $1,057.23 (+8.85%); Arista +0.35%, Nvidia +0.35%, Broadcom −1.24%; in Tokyo, Lasertec +11.14% and Advantest +9.78% (Midday 10, 2026-10-01). The "Mentioned on Closelooknet" block on this page lists the long reads, the reference entries and the dailies that name it.

What does Lasertec do?

Lasertec makes inspection and metrology systems used in chip manufacturing, best known for tools that inspect the photomasks and mask blanks used in extreme ultraviolet lithography. Its systems check these masks for defects before they are used to pattern wafers, work that becomes more demanding as chipmakers move to smaller process nodes. It is based in Yokohama, Japan. Its peer group is the Rubin index's Testing & Metrology sleeve, grouped for the same reason: ATE testers, inspection, and metrology vendors that keep yield curves honest at every node shrink. That group includes Teradyne, Onto Innovation, KLA, Camtek, PDF Solutions, Cohu, Nova and Aehr Test Systems. (Company snapshot of 2026-09-17.)

Where does Lasertec sit in the AI build-out?

In our Rubin Build-Out 100 index, Lasertec sits in Layer 3, Assembly & Test, within the Testing & Metrology sleeve — the group of ATE testers, inspection and metrology vendors that keeps yield curves honest as nodes shrink. Lasertec is a constraint here because mask inspection has to keep pace before wafers can even be exposed correctly. Lasertec is a constituent of the Rubin Build-Out 100. It carries a Closelooknet score, but only one module has been scored so far, so the score is still being built. The diary's Morning 10 has quoted it twice, once on a Tokyo equipment rally and once in a note on clustered support tests across the metrology names. (Company snapshot of 2026-09-17.)

What does this page show?

A live price chart with SMA overlays and drawing tools for 6920.T, performance metrics, index-membership context and the Closelooknet structure read — an investment research diary view, not investment advice.

How to use this chart

Toolbar

  • Range — 1M to MAX on daily closes. 1D/5D switch a US stock cell to 5-minute intraday bars; index and foreign cells fall back to 1M daily with a note.
  • Grid — 1×1 up to 2×2. Cells are synchronized: pan or zoom one and the others follow the same dates; the crosshair tracks across all of them. 4 INDICES loads Rubin · HALO · AEI · AW40 side by side.
  • Type / Scale — OHLC, line or area; linear or log price axis.

Picking a series

  • Tap the box in a cell's header to browse every Closelooknet series — headline indices, sub-indices, sectors, layers of all six families — plus the constituents.
  • Or type any ticker (NVDA, 7203.T, ASML.AS …) and press Enter — it charts in the cell straight from our data lake.

Studies

  • Overlays / Oscillators rows toggle the standard set (SMA, Bollinger, RSI, MACD …) per cell.
  • Levels (stock cells) draws the structure engine's support lines — regression bands, pivot cluster, SMA-200, the active fib zone.

Drawing

  • Tap a tool (Trend, Ray, H-Line, Fib, Channel, Rect, Note), then tap the chart once per point — the shape follows your finger or cursor between taps. The chart stops panning while a tool is armed; tap the tool again to release.
  • Drawings save per symbol in this browser and travel between the terminal and the asset page.
  • Delete key removes the selected drawing · Escape cancels a half-placed one · Clear wipes the symbol.

Wave counts

  • Wave places an Elliott count: tap the origin, then each wave end. Press Enter to stop early (inside wave 3 is fine) — dotted ghost targets sketch the remaining waves at guideline ratios.
  • On stocks the scanner's machine count appears automatically in grey — it is fully editable: drag any point, double-tap a label to remove it, Delete to dismiss it for good, Adopt to bring the machine's proposal back.
  • The sequence picker switches 1-5 / A-B-C / A-E / W-X-Y-Z; 1 2 3 cycles the degree; Subdiv starts a one-degree-smaller child count inside a wave.

Sharing

  • Card exports the cell as a branded PNG — chart, drawings and levels exactly as shown.

Related in the Closelooknet universe

same Closelooknet index seat first. Scored names rank on their Closelooknet score; names without one rank on trend state — above or below their 50- and 200-day averages — never on a score they do not carry.