—

FANUC CORPORATION (6954.T) — chart, structure and Closelooknet read

The Closelooknet read

FANUC designs and builds industrial robots and computerised numerical control systems that automate factory production lines, along with servomotors and related automation gear. It sells to manufacturers across automotive, electronics and general industry worldwide.

Detail below: the desk's view, the earnings record, peers and the company snapshot; daily prices on the price-history tab. Research diary readings, not advice.

Pick a ticker to load its detail page.

Signals for this name

Every Closelooknet reading that exists for 6954.T, from the same nightly bakes the boards use. Research diary readings, not advice.

Mentioned on Closelooknet 1 piece · newest: Dossier, “Industrial & Physical AI: Global Dependencies 2026–2030” (2026-03-06)

Mentioned on Closelooknet

Where 6954.T appears in the diary — 1 piece, newest first. Every link is our own writing.

Long reads

  • Industrial & Physical AI: Global Dependencies 2026–2030Dossier · $29 · 6 Mar 2026FANUC (1M+ industrial robots produced), Yaskawa, Kawasaki Heavy, and Denso constitute a global supply infrastructure that is "nearly impossible to replicate." This is not just the robots — it's the intricate layers of suppliers…
Weather around the name 3 macro readings: Money Temperature, Factor regime, Sovereign pressure

The weather around this name

Macro readings that apply by membership — the regime, the factor tape, the sector cell, the funding backdrop.

  • Money Temperature Composite 43/100 · S&P 500 fund at 35, below its 200-day averageEight instruments scored on position, momentum, volume, volatility and fragility — the regime every name trades inside. Temperature lab → 2026-11-20
  • Factor regime Defensive rotation — low-vol leading, regime-change watchMomentum against low volatility (SPMO / SPLV): below its 50-day trend, 47th percentile of the window, -15.5% over 20 sessions. Factor regime → 2026-11-20
  • Sovereign pressure Index -0.27 · down 0.06 over 21 sessionsG7 long-end yields, 10s30s and the slope — the funding weather for every balance sheet on this site. Sovereign pressure → 2026-11-19

Company snapshot — FANUC CORPORATION

6954.T in five paragraphs: what it makes and sells, where it sits in the Closelooknet stack, who it is priced against, why we track it, what we watch. Research diary, not advice.

What it does
FANUC designs and builds industrial robots and computerised numerical control systems that automate factory production lines, along with servomotors and related automation gear. It sells to manufacturers across automotive, electronics and general industry worldwide. The company is headquartered in Yamanashi, Japan.
Where it sits in the stack
FANUC holds no seat in our index. The diary follows it within the Industrial & Physical AI sleeve of our universe, where its robots form part of the physical infrastructure that automated and AI-directed manufacturing lines depend on.
Who it is priced against
Closelooknet's peer group here comes from a dossier that groups FANUC with Yaskawa, Kawasaki Heavy and Denso as the supply base behind industrial robot production; the market also names ABB as a competitor making similar equipment.
Why Closelooknet tracks it
FANUC carries no Closelooknet index seat and no score yet. It has a single mention in the diary, drawn from a dossier on Industrial & Physical AI dependencies that discusses its scale as a robot producer.
What the diary watches
The diary watches whether the supplier base behind industrial robot production, grouped with FANUC in that dossier, stays concentrated among a few makers or widens to new entrants.

FANUC CORPORATION (6954.T) trades on the TSE exchange in Japan.

Written from the company’s public profile and Closelooknet’s own readings, 2026-09-17. Descriptive, refreshed with the registry; corrections welcome via the imprint. closelook.net is an investment research diary — market structure, index membership and scores are our own readings, not investment advice. Related: index compare · sector dispersion · scanner.

FAQ · from the current data · as of 2026-11-21

Quick answers

What is FANUC CORPORATION (6954.T)?

FANUC CORPORATION trades as 6954.T on the TSE exchange (Japan) in the Closelooknet research universe, as of the registry build of 2026-11-21.

Is 6954.T in a Closelooknet index?

Not currently — FANUC CORPORATION is tracked in the Closelooknet research universe but is not a constituent of a Closelooknet functional index as of 2026-11-21.

Where does 6954.T trade against its moving averages?

FANUC CORPORATION trades 12.6% below its 50-day and 22.0% below its 200-day moving average (8.6% below its 20-day). As of 2026-11-20 — a technical state from the nightly Closelooknet bake, not advice. The Technical tab carries the full row.

Where has Closelooknet written about FANUC CORPORATION?

FANUC CORPORATION appears in 1 Closelooknet piece as of 2026-11-21, most recently Dossier: Industrial & Physical AI: Global Dependencies 2026–2030 (2026-03-06). What Closelooknet said most recently: FANUC (1M+ industrial robots produced), Yaskawa, Kawasaki Heavy, and Denso constitute a global supply infrastructure that is "nearly impossible to replicate." This is not just the robots — it's the intricate layers of suppliers… (Dossier, 2026-03-06). The "Mentioned on Closelooknet" block on this page lists the long reads, the reference entries and the dailies that name it.

What does FANUC CORPORATION do?

FANUC designs and builds industrial robots and computerised numerical control systems that automate factory production lines, along with servomotors and related automation gear. It sells to manufacturers across automotive, electronics and general industry worldwide. The company is headquartered in Yamanashi, Japan. Closelooknet's peer group here comes from a dossier that groups FANUC with Yaskawa, Kawasaki Heavy and Denso as the supply base behind industrial robot production; the market also names ABB as a competitor making similar equipment. (Company snapshot of 2026-09-17.)

Where does FANUC CORPORATION sit in the AI build-out?

FANUC holds no seat in our index. The diary follows it within the Industrial & Physical AI sleeve of our universe, where its robots form part of the physical infrastructure that automated and AI-directed manufacturing lines depend on. FANUC carries no Closelooknet index seat and no score yet. It has a single mention in the diary, drawn from a dossier on Industrial & Physical AI dependencies that discusses its scale as a robot producer. (Company snapshot of 2026-09-17.)

What does this page show?

A live price chart with SMA overlays and drawing tools for 6954.T, performance metrics, index-membership context and the Closelooknet structure read — an investment research diary view, not investment advice.

How to use this chart

Toolbar

  • Range — 1M to MAX on daily closes. 1D/5D switch a US stock cell to 5-minute intraday bars; index and foreign cells fall back to 1M daily with a note.
  • Grid — 1×1 up to 2×2. Cells are synchronized: pan or zoom one and the others follow the same dates; the crosshair tracks across all of them. 4 INDICES loads Rubin · HALO · AEI · AW40 side by side.
  • Type / Scale — OHLC, line or area; linear or log price axis.

Picking a series

  • Tap the box in a cell's header to browse every Closelooknet series — headline indices, sub-indices, sectors, layers of all six families — plus the constituents.
  • Or type any ticker (NVDA, 7203.T, ASML.AS …) and press Enter — it charts in the cell straight from our data lake.

Studies

  • Overlays / Oscillators rows toggle the standard set (SMA, Bollinger, RSI, MACD …) per cell.
  • Levels (stock cells) draws the structure engine's support lines — regression bands, pivot cluster, SMA-200, the active fib zone.

Drawing

  • Tap a tool (Trend, Ray, H-Line, Fib, Channel, Rect, Note), then tap the chart once per point — the shape follows your finger or cursor between taps. The chart stops panning while a tool is armed; tap the tool again to release.
  • Drawings save per symbol in this browser and travel between the terminal and the asset page.
  • Delete key removes the selected drawing · Escape cancels a half-placed one · Clear wipes the symbol.

Wave counts

  • Wave places an Elliott count: tap the origin, then each wave end. Press Enter to stop early (inside wave 3 is fine) — dotted ghost targets sketch the remaining waves at guideline ratios.
  • On stocks the scanner's machine count appears automatically in grey — it is fully editable: drag any point, double-tap a label to remove it, Delete to dismiss it for good, Adopt to bring the machine's proposal back.
  • The sequence picker switches 1-5 / A-B-C / A-E / W-X-Y-Z; 1 2 3 cycles the degree; Subdiv starts a one-degree-smaller child count inside a wave.

Sharing

  • Card exports the cell as a branded PNG — chart, drawings and levels exactly as shown.